Home Mechanical power transmission Involute gear

Involute gear

Calculation of involute gears

tec-science - 10/31/2018

Construction and design of involute gears

tec-science - 10/31/2018

Profile shift of involute gears

tec-science - 10/31/2018

Engaging of involute gears (meshing)

tec-science - 10/31/2018

Gear cutting (gear manufacturing)

Involute gear tec-science - 10/31/2018 0

Learn more about the different manufacturing processes for cutting involute gears in this article. Gear hobbing Involute gears are often manufactured by hobbing. The cutting edges of a hob are straight-flanked and wrap...

Manufacturing undercut during hobbing (yellow and red gear)

Undercut of gears

Involute gear tec-science - 12/02/2018 0

Undercut occurs when the number of teeth of a gear is too small. An undercut leads to a weakening of the strength of the tooth! https://youtu.be/bol1U0BHcew Undercut Undercut due to manufacturing process The animation...

Rack

Involute gear tec-science - 11/04/2018 0

In this article, learn more about the meshing of the teeth of a gear with the teeth of a rack. https://youtu.be/g4USx2hj3eU Introduction The fundamentals when two gears are meshing have already been explained in...