Ooops... Error 404
Sorry, but the page you are looking for doesn't exist.
You can go to the HOMEPAGE

OUR LATEST POSTS

Crowned pulley for centering a flat belt

Why do crowned pulleys keep a flat belt on track?

0
In this article, you will learn why a convex curvature of a crowned pulley will cause a flat belt to keep track and not jump off the pulley! Paradoxical as it may...
Pressure-volume work done by the surroundings

Flow process work as pressure-volume work of closed systems

The flow process work done in open systems can be interpreted as the pressure-volume work of closed systems. Flow process work As explained in detail in the article on flow process work, the...
Shaft work of an open system

First law of thermodynamics for open systems (derivation)

Learn more about the derivation of the first law of thermodynamics for open systems in this article. Shaft work in an open system In the article Shaft work in open systems it was...

Shaft work in open systems

Shaft work is the total work performed in open systems, which is usually transferred by shafts. Flow process work In the article on flow process work, the discussion of the work performed in...
Outflow of a fluid from a pipe with a pump in operation

Flow process work in open systems

Flow process work is the work done by an open system to transfer a fluid through the system boundaries (flow work) and change the volume (pressure-volume work). Energetic processes at the boundaries...
Principle of pressure increase in pumps by means of rotating impeller

Flow work in open systems

The work which is required to maintain the flow against the different static pressures between inlet and outlet of an open system is referred to as flow work. Introduction Many thermodynamic processes take...